Your files are held in complete safety and security while Bittele Electronics is in possession of them.
Your files are never shared nor will any third parties have access to your design files.
Since they are your property, we respect the copyright of your files.
The customer controls the disposition of these files per your requirements and written approval.
Yes. H-celerity has the capability to produce PCBs in any amount. But,the greater the quantity, the greater the cost savings.
We accept order with as low as a quantity of 1 (piece or panel).
We can make 0.075-0.4mm,0.4mm-6.0mm, the material is FR4.
While expensive, we can manufacture these materials. Contact us for pricing prior to placing an order.
Laminate brand: KB
ANSI grade: FR-4
Laminate thickness 0.5 mm (0.020″), 0.8 mm (0.032″), 1.0 mm (0.040″), 1.5 mm (0.062″)
CU thickness 18 um (1/2 oz) or 35 um (1 oz)
Operating temperature Tg > 130 C
Soldering 260C/500F – 40 sec., 290C/554F – 20 sec.
Dielectric constant 1Mhz: 4.0 – 4.5, guaranteed < 5.0
Dissipation factor 1MHz: 0.02-0.03, guaranteed < 0.03
Volume resistivity: Ohm.cm > 5*10^14
UL 94V-0, UL746 CTI 100
0.5 oz, 1.0 oz, 1.5 oz, 2.0 oz, 2.5 oz, 3.0 oz, 3.5 oz, 4.0 oz, 4.5 oz and 5.0 oz. Higher than 5oz need evaluatived.
Liquid Photo Image-able (LPI) Solder mask
We accept Gerber RS-274X format.
The options include HASL, Immersion gold, Immersion tin, Immersion Silver, OSP, and HASL lead free. Call for other options.
If this page does not answer your questions, feel free to contact our technical support:Email: sales@h-cpcb.com Technical Support is available from 10:00AM to 6:30PM (EST)